FAS Online Member Community

Latest Discussion Posts

  • Free Webinar Struers webinar July 27 at 2:00 PM ET Title: Hardness Testing: Sample Preparation and Other Parameters That Influence Results REGISTER HERE Hardness testing is a useful tool for the evaluation of materials, quality control ...

  • The recent controlled demolition brought down the remaining section of the previously collapsed South Florida condo building in Surfside, Fla., allowing first responders to better continue their search and rescue efforts. How does the changed landscape ...

  • If it's not sensitised, then you should check for loss of passivation. Also check out for stray currents. Regards Rahul Gupta

  • Reminder - REGISTER NOW Thermo Fisher Free Webinar Date/Time: Wednesday, June 23 at 11 AM EDT REGISTER HERE Title: 3D Imaging of Lithium-ion Batteries ------------------------------ Carrie Hawk ASM International Community Engagement ...

  • Robert Thank you for your comments. Actually, we did the hardness testing and it supported our recommendation as you advised. I share here the discussion of this post at the ASM Community as well. " DAN, I believe this piping work was done according ...

  • Profile Picture

    tunneling corrosion

    I would like to share some images for MIC of St.St. 304 pipe. The SEM image shows some bacteria inside the corrosion pit, while the optical micrograph shows the tunneling corrosion paths. I am wondering if someone knows if there is any preferred path ...

Recent Shared Files

FOLLOW US ON

WHO WE ARE

The mission of the ASM Failure Analysis Society is to serve the needs of its members and the worldwide Failure Analysis community by facilitating educational opportunities, promoting the development of professional relationships, and diffusing knowledge to advance the field of failure analysis and prevention.